Termékek a polimer (117)

Promix specializes in demanding cooling and heat exchanger tasks such as cooling and heating of viscous or decomposition-sensitive media / plastic melts. The Promix P1 heat exchanger is the unique combination of a very efficient static mixer and a powerful cooler. The novel patented technology opens up completely new process engineering possibilities in the cooling and heating of plastic melts and other viscous fluids. The simultaneous mixing and cooling processes in the P1 allow for very efficient cooling and heating without the formation of deposits or the risk of product decomposition. Advantages Promix P1 heat exchanger Very efficient cooling of polymer melts close to the solidification point Precise temperature control and uniform temperature distribution at the outlet Very robust construction Extremely gentle cooling and heating of residence time critical fluids Unique self-cleaning behavior Reliably scalable from laboratory test to production scale Test options

NC gear hobbing from module 0.15 to module 1.5 , in various materials such as steel, stainless steel, brass, bronze, aluminium, polymers, bakelite and others. We can also supply a finished product, complete with thermal and surface treatments on request. Gear cutting of outer diameters from min. 3mm to approximately 50mm in automatic unmanned mode. Maximum length of parts subject to gear cutting: approximately 100mm. We are capable of supplying oriented-toothing, synchronized toothing, crown gears with special profiles and can manufacture small, medium-sized and large productions batches by means of chutes and automatic loaders.

Syntech Roadware Syntech Roadware is a high penetration two-component hybrid urethane which, combined with quartz, produces a hard and instant polymer to repair cracks and crevices in concrete floors. Syntech Roadware has a very low viscosity allowing the penetration of the product in depth, even in the narrowest cracks. It has short reaction times, in fact in 10 minutes at 20°C the material polymerizes completely and catalyzes quickly even in environments with temperatures below 0°C. It has good resistance to chemical attack. When combined with quartz powder, Syntech Roadware, forms a highly resistant compound with properties similar to existing concrete but with the flexibility that persists over time. Repair of splits or cracks in concrete, restoration of deteriorated concrete degradation, repair of cracks and pop-out phenomena in concrete. Slightly widen the crack with a circular saw to facilitate the penetration of Syntech Roadware. Before applying the product, vacuum the dust created. The support must be clean and free from dust or dirt. Apply Syntech Roadware directly on the crack or on the degraded area until the gap is completely saturated. Add quartz directly to the crack and repeat the Syntech Roadware application operation. Smooth with a spatula and leave the product to work. With a Syntech Roadware cartridge, an average of 50 linear metres of gap of 5 mm width is repaired. Bi-mix cartridge 600 ml

iglidur® G V0 - polymer plain bearings with UL94 V0 rating V0 classification iaw. UL94, universal. The new material attains the V0 classification in accordance with UL94, making it ideally suited for applications with elevated fire protection requirements (vehicle interiors, aerospace, building technology, etc.). Other properties are similar to our allrounder iglidur® G. Lubricant- and mainteance-free V0 classification pursuant to UL94 high wear-resistance Universal applicability

für fett- oder ölgeschmierte Anwendungen

grease lubricated

Pompe di scarico efficienti nel design AT La serie POLY-AT offre un alto grado di flessibilità per quanto riguarda l'installazione sotto il reattore di fusione dei polimeri. Il cliente può scegliere tra 3 diverse geometrie di flange, in modo da poter sempre selezionare la combinazione tecnicamente ed economicamente migliore di reattore e flangia della pompa. Grazie alle nuove geometrie degli ingranaggi, sono possibili pressioni differenziali fino a 320 bar con dimensioni di pompa selezionate. Il nuovo design è completato dalla solita varietà di combinazioni di materiali diversi. La combinazione più comune è certamente l'alloggiamento in acciaio inossidabile o in acciaio al carbonio e i cuscinetti a strisciamento in acciaio per utensili o in bronzo d'alluminio. Media di trasporto:per fusione, polimero

grease lubricated

We offer UV print and eco solvent print on PVC vinyl films. Self-adhesive polymeric white vinyl film with a permanent adhesive and a matte finish. Designed for digital large format printing for indoor and outdoor use. Characteristic: matte surface, acrylic adhesive - permanent, self-adhesive, waterproof. Custom formats and shapes available. Applications: advertising on vehicles, product labels, room marking, stickers for boards, coffers, windows. Polymeric vinyl is a more advanced option, offering improved durability and longevity compared to monomeric vinyl. It is constructed with multiple layers and contains plasticisers that enhance its flexibility and resistance to environmental elements. This type of vinyl exhibits better dimensional stability and can withstand moderate temperature fluctuations without significant shrinkage or curling. Polymeric vinyl is suitable for both indoor and outdoor applications, making it a versatile choice for a wide range of projects.

Diameter [mm]: length [mm]: Polymer bearings applications overview Polymere bearings application examples overview Polymer bearings applications overview iglidur® J4 - low cost and low wear Lubricant- and maintenance-free Low-cost-material for large volumes Low coefficients of friction Media resistant Lowest humidity absorption Diameter [mm]: length [mm]: Polymer bearings applications overview Polymere bearings application examples overview Polymer bearings applications overview

Projets Composites 5

Projets Composites 1

Kaneka liquid polymers are widely recognized as the premium choice of base resins for producing sealants, adhesives, and coatings. Their unique properties enable KANEKA MS POLYMER™, KANEKA SILYL™, and KANEKA XMAP™ based products to deliver outstanding performance for a wide variety of markets, including construction, industrial, transportation, flooring, waterproofing, DIY, and specialty markets. Kaneka’s continuous pursuit of innovation is reflected in our broad product portfolio covering various applications.

Projets Composites 17

Mit CONSTAB CON-Batch 30X können Folien dichter und fester produziert werden - die Schichtdicke hingegen kann um ca. 25 %, die Heizleistung um ca. 20 % reduziert werden. CONSTAB CON-Batch 30X Masterbatch wird z.B. bei der Herstellung von thermoformbaren Platten verwendet und ermöglicht eine Verringerung der Gesamtdicke der Platte um bis zu 30 % bei gleichzeitiger Beibehaltung ihrer mechanischen Integrität. Es verbessert die mechanischen und optischen Eigenschaften des Endprodukts. Darüber hinaus dient das Masterbatch als Verarbeitungshilfsmittel bei Extrusionsanwendungen und ermöglicht eine höhere Produktionsgeschwindigkeit und ein breiteres Verarbeitungsfenster, während der Energieverbrauch gesenkt wird. CON-Batch 30X kann problemlos in Monofilmen verwendet und somit recycelt werden. CON-Batch 30X kann mit einem Zertifikat geliefert werden, das die CO₂-Neutralität bestätigt

AUTOSOL® DYNAMIC COMPLETE PREMIUM This advanced formulation combines uniquely shaped polishing media, which produce an extremely high gloss finish, with the latest Si-polymer based protection technology. The one-step polish is easy to apply and not only removes medium scratches and signs of wear, but also impressively enhances the vehicle's gloss and colour depth. AUTOSOL® DYNAMIC COMPLETE PREMIUM leaves behind an extremely resistant protective layer. Item number:11 038300

Dicht- und Klebemasse auf Polymerbasis, für Klebe- und Abdichtungsarbeiten. Verbindet eine fast unbegrenzte Anzahl verschiedener Materialien

TS651 besteht aus Hochleistungs-Thermoplasten, die speziell für eine konstant geringe Reibung bei leichten bis mittelhohen Belastungen unter trockenen oder geschmierten Betriebsbedingungen ausgelegt sind.

Armaglass Structura 115 115 g/m2 structural reinforcement mesh in alkali-resistant fibreglass with 12 x 12 mm square mesh, containing >16% zirconium dioxide, constructed with a leno weave and primed with thermosetting polymer. It is straightforward and quick to apply, simple to handle and easy to cut. Resistant to atmospheric agents and aggressive environments, conferring durability to the composite systems in which it is used. Suitable for any substrate and perfectly compatible with both cement- and lime-based mortars. Perfect for strengthening reinforced plastering with an anti-overturning function along with the structural consolidation of masonry and vaulted structures. Easy and quick application, simple to handle and to cut. Combines lightness and thinness with excellent mechanical characteristics in terms of the weft and warp. Resistant to atmospheric agents and aggressive environments, it confers durability to the composite systems in which it is used. Suitable for any substrate and perfectly compatible with both cement-based and lime-based mortars. Armaglass Structura 115 is a mesh for the structural reinforcement and consolidation of masonry and vaulted structures. It is ideal for reinforcing plasters with anti-overturning function. Application on masonry and vaults: In the event that connectors are being used, proceed with creating holes of a suitable diameter, in accordance with the chosen connection system and arranged in line with the design instructions and with the selected connection system (Armaglass Connector, Armaglass Connector SINGLE, Armaglass Connector Twin). Secure the connectors with resin anchors (Syntech Profix) or hydraulic binder-based slurry (Grout Cable, Sanafluens). Apply an initial layer of mortar (see the technical data sheet of the selected product), positioning the Armaglass Structura 115 mesh on the still-fresh mortar, taking care to ensure an overlap of at least 10 centimetres, before applying the second layer of mortar. Whilst the mortar is still fresh, lay the mesh sheeting, proceeding from top to bottom, and immersing with the help of a putty knife, being sure to overlap each segment by at least 10 centimetres and impeding the formation of bubbles and bends. 1.1 m/m²: The sheets adjacent to the fibreglass mesh are to be overlapped along the edges by at least 10 centimetres. Packaging: Roll of 50 m2 UM: €/m2

Kane Ace™ MX is Kaneka’s novel coreshell rubber (CSR) toughening system for thermo set resins. It is a predispersed CSR Masterbatch which enhances the physical properties of the resins through optimal dispersion of core-shell particles. The revolutionary liquid impact modifiers of Kane Ace™ MX achieve highly improved strength, improved fracture toughness and endurance without losing the heat resistant characteristics of thermoset resins. The liquid nature guarantees an easy handling and mixing into your system, which will save you time and reduces the production cost.

Strong, water-based adhesive disperion for heat transfers. ✔ Very hard once dried ✔ Hydrophobic ✔ Low Viscosity ✔ Great price ✔ Clear coating ✔ Application temp.: 80 - 110°C ✔ For glas, ceramics, ABS, ... Our GK-I hot melt dispersions is tailored for heat transfer printing. With a rather high activation temperatur is results is very durable bonds once applied. It can be used well with toner-based prints. This adhesive is great for heat transfer printing onto glas or ceramic products like wine or spirits bottles as well as promotional or cosmetic products made from ABS. Furthermore, it offers self-crosslinking capabilities which increase the adhesion even further. It shows great resistance against water and heat. The particles in this dispersion are fine dispersed and result in even and repeatable results.

Anti-Friction Plain Bearings, self-lubricating

Hydrodynamic Composite Bearing

PETG has high transparency and good adhesion for printing, could be used for makeup bottles, containers, package film and etc. Mixed Polymers can also be extruded into sheet or films, made into plastic products by injection molding, or processed into Christmas tree leaves. Mixed Polymers can be mixed with virgin material, such as ABS, PP, PS and PMMA to extrude or inject plastic products. Recycled PBT/MMA Mixed Polymers:16~18 MFR(240°C*2.16kgf) Recycled PBT/MMA Mixed Polymers:230°C (Suggest working temperature) OTHER (Recycled PET-G Polymers):0.7±0.02 IV OTHER (Recycled PET-G Polymers):220°C (Suggest working temperature)

Projets Composites 4

Mechanically robust and with a chemical and condensed waterproof sensing area, the digital IST AG HYT humidity modules offer a wide application window and an optimal price-performance ratio. Precisely calibrated, the HYT modules deliver an outstanding accuracy and excellent long-term stability even at high humidity - ideal for sophisticated mass applications, industrial handheld devices and precise humidity transmitters. Advantages of the HYT 271 digital humidity module include: — Calibrated and temperature compensated — Fast response time — Excellent humidity/temperature accuracy and stability — High chemical resistance — Wide humidity and temperature range (0 % RH to 100 % RH and -40 °C to +125 °C) — Very low drift — I2C protocol (address 0x28 or alternative address) — Very stable at high humidity — Interchangeable without adjustment Mounting:for integration Other characteristics:digital, with temperature measurement

Nu-Klär ist eine schnell trocknende, matt glänzende, geruchsarme Bodenbeschichtung auf Polymerbasis mit geringen VOC-Werten.

Projets Composites 18

Bronze backed PTFE plain bearing

Anti-Friction Plain Bearings, self-lubricating